Case History Archives - Страница 2 из 4

Gimatic EOAT for medical tubes

22 января 2021/в Case History/от Paola Posco

Problems:
Automobile instrument panel is an important part of automobile interior. The modeling part of this part is complex. The surface of many products is also textured which cannot be picked out by vacuum cups. And there is also one bumper in this project that has to be picked out from cavity side. At present, it is a common problem to take parts of automobile plastic parts from cavity side.

How to use GIMATIC products solve them?
GIMATIC components are standardized products, which can be made into the most suitable shape according to the modeling of products. When the surface is textured, we can use OFR gripper at the edge of the product and cooperate with the front suction cup to hold the product out. In this case, even if the suction cup is not vaccumized, the product can be taken out smoothly. As for the problem of taking parts from cavity side, we will describe it separately in another Case.

Non-marking EOAT for plastic parts

11 декабря 2020/в Case History/от Paola Posco

Problems:
Automobile instrument panel is an important part of automobile interior. The modeling part of this part is complex. The surface of many products is also textured which cannot be picked out by vacuum cups. And there is also one bumper in this project that has to be picked out from cavity side. At present, it is a common problem to take parts of automobile plastic parts from cavity side.

How to use GIMATIC products solve them?
GIMATIC components are standardized products, which can be made into the most suitable shape according to the modeling of products. When the surface is textured, we can use OFR gripper at the edge of the product and cooperate with the front suction cup to hold the product out. In this case, even if the suction cup is not vaccumized, the product can be taken out smoothly. As for the problem of taking parts from cavity side, we will describe it separately in another Case.

Gripper for plastic components in multi-cavity moulds

11 декабря 2020/в Case History/от paolo

Multi-tasking EOAT to pick the parts, change the positions and change the distance of the parts

4 декабря 2020/в Case History/от Paola Posco

Problems:
Automobile instrument panel is an important part of automobile interior. The modeling part of this part is complex. The surface of many products is also textured which cannot be picked out by vacuum cups. And there is also one bumper in this project that has to be picked out from cavity side. At present, it is a common problem to take parts of automobile plastic parts from cavity side.

How to use GIMATIC products solve them?
GIMATIC components are standardized products, which can be made into the most suitable shape according to the modeling of products. When the surface is textured, we can use OFR gripper at the edge of the product and cooperate with the front suction cup to hold the product out. In this case, even if the suction cup is not vaccumized, the product can be taken out smoothly. As for the problem of taking parts from cavity side, we will describe it separately in another Case.

Automatic loading and unloading for CNC Machine

20 ноября 2020/в Case History/от Paola Posco

Problems:
Automobile instrument panel is an important part of automobile interior. The modeling part of this part is complex. The surface of many products is also textured which cannot be picked out by vacuum cups. And there is also one bumper in this project that has to be picked out from cavity side. At present, it is a common problem to take parts of automobile plastic parts from cavity side.

How to use GIMATIC products solve them?
GIMATIC components are standardized products, which can be made into the most suitable shape according to the modeling of products. When the surface is textured, we can use OFR gripper at the edge of the product and cooperate with the front suction cup to hold the product out. In this case, even if the suction cup is not vaccumized, the product can be taken out smoothly. As for the problem of taking parts from cavity side, we will describe it separately in another Case.

Car’s Front Face Bar

13 ноября 2020/в Case History/от Paola Posco

Problems:
Automobile instrument panel is an important part of automobile interior. The modeling part of this part is complex. The surface of many products is also textured which cannot be picked out by vacuum cups. And there is also one bumper in this project that has to be picked out from cavity side. At present, it is a common problem to take parts of automobile plastic parts from cavity side.

How to use GIMATIC products solve them?
GIMATIC components are standardized products, which can be made into the most suitable shape according to the modeling of products. When the surface is textured, we can use OFR gripper at the edge of the product and cooperate with the front suction cup to hold the product out. In this case, even if the suction cup is not vaccumized, the product can be taken out smoothly. As for the problem of taking parts from cavity side, we will describe it separately in another Case.

Dashboard Grasping

30 июня 2020/в Case History/от Paola Posco

Problems:
Automobile instrument panel is an important part of automobile interior. The modeling part of this part is complex. The surface of many products is also textured which cannot be picked out by vacuum cups. And there is also one bumper in this project that has to be picked out from cavity side. At present, it is a common problem to take parts of automobile plastic parts from cavity side.

How to use GIMATIC products solve them?
GIMATIC components are standardized products, which can be made into the most suitable shape according to the modeling of products. When the surface is textured, we can use OFR gripper at the edge of the product and cooperate with the front suction cup to hold the product out. In this case, even if the suction cup is not vaccumized, the product can be taken out smoothly. As for the problem of taking parts from cavity side, we will describe it separately in another Case.

Bumper Fixed Mold Part Picking

30 июня 2020/в Case History/от Paola Posco

Problems:
This project is to produce a series of interior and exterior decoration products for BMW’s new car. Among them, six products are front and rear bumpers of automobiles. Taking part from cavity side is a common difficulty for bumper which the demoulding force is very large, and the product is easily scratched.

How to use GIMATIC products solve them?
We used round aluminum pipes to build the frame of the EOAT which equipped with various clamping legs with a diameter of 30 or 20 mm. This ensures that the positions of all gripper can be adjusted universally. GIMATIC’s ZJ series products which Large clamping force, adjustable double stroke cylinder and simplified structure are very suitable for taking out from cavity side. GN series together with various large suction cups, has played a very good supporting role for the whole bumper.

High Precision Picking & Cutting EOAT

30 июня 2020/в Case History/от Paola Posco

Problems:
There are many sprues on each product, and the maximum number is 12 pieces. After picking out, sprues need to be cut on the same time. The shearing accuracy is 0.1mm.

How to use GIMATIC products solve them?
We use GIMATIC’s standard parts OFR to clamp products and support by 3D print part. The 3D printing part makes accurate profiling and positioning for the product shape, and the flocking surface on the 3D printing part effectively protects the high gloss surface of the product from scratches. There is soft pad on the gripper which protect the product surface. By this way, it can be ensured that the product will not change after the product is taken out.

TIKI SAFETY AB

28 мая 2020/в Case History/от Paola Posco

The customer Chiesa Artorige s.r.l. GIT000424 is a manufacturer of die-cutting machines with over 60 years of experience in the market.

To try to differentiate themselves from the competition, they thought of integrating an automatic unloading exhaust system on the machine, this with a view to making the machine faster and more precise, but also to protect the operator from the monotonous work of unloading the machine.

The challenge was to create a system with multiple gripping points that could be activated or deactivated in compartments to ensure the grip of different formats. These are gripping tools that manage to handle up to 5 different sizes each.

The gripping elements are made up of Gimatic EMF-2525 profiles on which compensated suction cup suspensions and flat silicone suction cups have been applied. To frame the gripping hand there is a VSX1435 push system that allows to help the detachment of the cut product by separating it from the scrap during the picking phase.

The gripping hands have been equipped with a QC150 quick changer system, this allows you to change tools in a few seconds, ensuring continuity of pneumatic wiring between the robot side and the tool side.

For this project, we collaborated 360 ° with the customer, first of all providing a technical visit that allowed us to collect all the data that were used by the design office to develop the final product, in addition, the hands of the robot were completely assembled and wired by our technicians in order to supply a turnkey product that the customer only had to install on the robot wrist.

We have managed to fully satisfy the customer’s needs.